ACM Dufour Heritage 8.0

< Back to "Motor boats 22 to 27 foot"

This boat has been sold but here are some boats that are still For Sale

ACM Dufour Heritage 8.0

ACM Dufour Heritage 8.0

Boat REF# 34622
Price removed from sale/
LOA 8.00m (26'3")
Year 1998
Construction GRP
Underwater profile Planing
Berths 4
Engine 1 x diesel 100hp, Yanmar 4 cylinder (1998)
Lying Falmouth

I want to see full spec & up to 80 photos of this boat,register me now

Extra Details

Designer J & J Design
Builder ACM Dufour Power, France
Lying Falmouth
Fuel capacity 1 x 200.0 ltr (44.0 G)
Water capacity 1 x 75.0 ltr (16.5 G)
Holding tank capacity 0 x 0.0 ltr (0.0 G)
Last survey Not Recorded

Mechanical

Engine 1 x diesel 100hp
Yanmar 4 cylinder (1998)
Engine Hours Not Recorded
Engine Cooled Fresh Water
Steering Wheel
Drive Shaft
Prop(s) three blade
Fuel consumption (approx) 10.0 ltr (2.2 G) /hour At Cruising Speed
Cruising speed (approx) 14 knots
Max speed (approx) 18 knots
Bow thruster
Trim Tabs

Dimensions

LOA 8.00m (26'3")
LWL 0.00m (0'0")
Beam 2.60m (8'6")
Draft Min 0.70m (2'4")
Draft Max 0.70m (2'4")
Airdraft 2.50m (8'2")
Displacement 2,000kg (4,410.0lbs)
Headroom 2.00m (6'7")

Electrical Systems

12 volt, 2 batteries charged by: engine, shore power

construction

GRP construction with Planing underwater profile, gelcoat finish
Developed Vee hull constructed usinga moulded frame structure and Klegecell core sandwich hull. Extended hard top over cockpit. The hull is protected with teak moulding and stainless steel rubbing strip.

Accommodation

Cooker tick Sink tick
Fridge tick Pressurised water system tick
Hot water system tick Cockpit shower tick
Non-Smokers tick    
Handbasin 1
Shower 1
Heads 1 heads (Manual)
Varnished, light wood interior, light and airy saloon complete with a sun roof. Teak covered cockpit seats.
4 berths with 2 doubles and 0 singles in 1 cabin(s) 2 burner gas cooker

Nav Equipment

Compass tick Speed tick
Log tick Echo sounder tick
VHF DSC radio tick GPS tick
Chart plotter tick Autopilot tick
Stereo tick Navigation lights tick

Deck Gear

Warps tick Fenders tick
Boathook tick Road trailer tick
Swim Platform tick Swim Ladder tick
Instrument Covers tick    
electric Simpson Lawrence windlass (with remote control)
1 anchors
(12 kg Kedge)
0.00m (0'0") of chain
20.00m (65'7") of warp
(Inflatable)
2 no. teak director's chairs.

Safety Equipment

Emergency steering tick Horn tick
2 bilge pumps (1 manual / 1 electric)
Engine bay auto fire extinguisher.

Broker's Comments

Register with Boatshed to see 35 extra photos of this ACM Dufour Heritage 8.0 .
I like these ACMs and I believe they are very suitable for our Northern European climate, the hardtop making the boat very useable both early and late in the season. Throw in distinctive styling, an economical Yanmar on a shaft drive and the winning formula is complete.

You will be happy with this engine once the red diesel goes.....

The saloon is very well appointed and light and airy. The saloon seating converts to a double berth but you will have to tidy away your supper first.

The cockpit is big enough for outdoor living when the weather permits and if it warms up enough, there is a small access door to the swim platform for a dip in the sea with a hot shower to welcome you back on board.

300 hours on the clock and a full service history.

These boat details are subject to contract.

Note: Offers on the asking price may be considered.

This ACM Dufour Heritage 8.0 has been personally photographed and viewed by Steven of Boatshed Falmouth. Click here for contact details.
Disclaimer
The particulars detailed herein are intended to give a fair description of the vessel but their accuracy cannot be guaranteed, these particulars are not a part of any contract or offer and are supplied on the understanding that all negotiations shall be through Boatshed Brokerages, who are acting as brokers for the vendor. The vendor is not selling in the course of a business unless otherwise stated. The prospective purchaser is strongly recommended to check the particulars and where appropriate, at his own expense, to employ qualified agents to carry out surveys, structural and/or mechanical & electrical.
Feedback Form