Creala 36 Heavy Displacment cruising Yacht

< Back to "Sail boats 35 to 50 foot"

This boat has been sold but here are some boats that are still For Sale

Creala 36 Heavy Displacment cruising Yacht

Creala 36 Heavy Displacment cruising Yacht

Boat REF# 120235
Price removed from sale/
LOA 11.89m (39'0")
Year 1983
Construction GRP
Underwater profile Long keel
Berths 7
Engine 1 x diesel 34hp, Yanmar 3HMF (1983)
Lying Phuket Thailand

I want to see full spec & up to 80 photos of this boat,register me now

Extra Details

Designer W.I.B. Crealock
Builder Seacraft International
Lying Phuket Thailand
Fuel capacity 1 x 130.0 ltr (28.6 G)
Water capacity 2 x 225.0 ltr (49.5 G)
Holding tank capacity 1 x 90.0 ltr (19.8 G)
Last survey 00/00/2003

Mechanical

Engine 1 x diesel 34hp
Yanmar 3HMF (1983)
Engine Hours engine1:   5044
Engine Cooled Fresh Water
Steering Wheel
Drive Shaft
Prop(s) 3 blade bronze
Fuel consumption (approx) 2.0 ltr (0.4 G) /hour At Cruising Speed
Cruising speed (approx) 5.5 knots
Max speed (approx) 6.5 knots
Engine spares tick    
4 x 110 A/h AGM house batteries and 1 x 110 A/h engine start battery.
110v 250w Inverter.
New 60A Battery charger.
Balmar ARS 5 Smart regulator.
110 V and 220 V shore-power capabilities.

Dimensions

LOA 11.89m (39'0")
LWL 8.53m (28'0")
Beam 3.40m (11'2")
Draft Min 1.75m (5'9")
Draft Max 1.75m (5'9")
Displacement 8,526kg (18,800.0lbs)
Headroom 1.90m (6'3")
Storage On marina

Rig

Cutter rigged Aluminium spars (1983), with stainless steel standing rigging (2004)

Sails

Mainsail - Slab (1996)
Headsail - Furling (2010)
Halyard winches 3
Sheet winches 4
Other sails Staysail (1998)
Cruising chute (1998)
Fully battened main with 3 reefing points.
Norseman quick-release staysail stay.

Electrical Systems

12 volt, 5 batteries charged by: engine, shore power

construction

GRP construction with Long keel underwater profile, gelcoat finish
Solid hand laid FRP Hull, using 24 oz roving and1.5 oz mat, Laminations to exceed Lloyd's and ABS as per designers spec. Skeg reinforced with S/S for extra rigidity. Encapsulated solid cast iron keel.
Solid Teak joinery.
All 316 Stainless Steel.
New Lavac Heads 2009.
All Tanks are 316 S/S new in 2004.

Accommodation

Cooker tick Grill tick
Oven tick Fridge tick
Curtains tick Cabin heating tick
Manual water system tick Pressurised water system tick
Hot water system tick    
Handbasin 1
Shower 1
Heads 1 heads (Manual)
Solar bag shower for cockpit.
2 x Fans in saloon & 1 in vee berth.
Isotherm refrigerator/freezer.
Alpenglow lights in main cabin.
7 berths with 3 doubles and 1 singles in 2 cabin(s) 3 burner gas cooker

Nav Equipment

Compass tick Wind tick
Echo sounder tick Radar tick
VHF tick SSB tick
GPS tick Autopilot tick
Stereo tick Clock tick
Barometer tick Navigation lights tick
H / H Garmin GPS
Binoculars

Deck Gear

Sail cover tick Sprayhood tick
Warps tick Fenders tick
Boathook tick    
electric Lofrans (2009) windlass
3 anchors
(35 lb CQR / 30 lb Danforth / 20 lb Bruce)
48.77m (160'0") of chain
76.20m (250'0") of warp
Fleming windvane self-steering system
2.5hp outboard, Suzuki 4 Stroke, Short Shaft (2010)

Safety Equipment

Life jackets tick Emergency steering tick
Searchlight tick Safety harnesses tick
EPIRB 406MHz tick    
2 bilge pumps (1 manual / 1 electric)
EPIRB neds new battery.
An extra uninstaled new submersible bilge pump.
Jack Stays, Lifesling, Personal strobe light and Vari pistol.

Broker's Comments

Register with Boatshed to see 67 extra photos of this Creala 36 Heavy Displacment cruising Yacht.
This pretty double ender has a cutter rig and was built in 1983 in the Philippines by Seacraft International (Philippines). She is known as a Creala 36 and was designed by W.I.B. Crealock. There were only six (6) Creala 36's built and this one is hull #1, numero uno. She was designed and built as a cruiser and everything about her is strong and functional, not like so many high production boats constructed of flimsy fiberglass and wood veneer interiors. Every bit of wood on this Creata 36 is solid, like her hull and deck.
During the spring of 2004, Bucephalus was hauled out at Phuket Boat Lagoon and for the next three months she was given a full refit. The original fresh water tanks and diesel fuel tank were replaced with ones fabricated of 316 grade stainless steel. The teak deck was replaced, the mast inspected and painted, all standing rigging replaced, the mast head annodized, the bottom anti-fouled and the topsides repainted. She even received a new Windex and Horizon depth-sounder and knot-meter.

These boat details are subject to contract.

For more information on this Creala 36 and other great boats for sale in Pkuket / Thailand please contact the Boatshedphuket.com yacht sales team.
This Creala 36 Heavy Displacment cruising Yacht has been personally photographed and viewed by Alan of Boatshed Phuket. Click here for contact details.
Disclaimer
The particulars detailed herein are intended to give a fair description of the vessel but their accuracy cannot be guaranteed, these particulars are not a part of any contract or offer and are supplied on the understanding that all negotiations shall be through Boatshed Brokerages, who are acting as brokers for the vendor. The vendor is not selling in the course of a business unless otherwise stated. The prospective purchaser is strongly recommended to check the particulars and where appropriate, at his own expense, to employ qualified agents to carry out surveys, structural and/or mechanical & electrical.
Feedback Form