Gaffel Cutter

This boat has been sold but here are some boats that are still For Sale

Gaffel Cutter

Boat REF# 37014
Price removed from sale/
LOA 11.90m (39'1")
Year 1989
Construction Wood
Underwater profile Other
Berths 5
Engine 1 x diesel 75hp, Mercedes Benz (1997)
Lying Cadiz

I want to see full spec & up to 80 photos of this boat,register me now

Extra Details

Designer
Builder Oehlmann
Lying Cadiz
Fuel capacity 0 x 0.0 ltr (0.0 G)
Water capacity 0 x 0.0 ltr (0.0 G)
Holding tank capacity 0 x 0.0 ltr (0.0 G)
Last survey Not Recorded

Mechanical

Engine 1 x diesel 75hp
Mercedes Benz (1997)
Engine Hours Not Recorded
Engine Cooled Raw Water
Steering Tiller
Drive Shaft
Prop(s) 3 blade
Fuel consumption (approx) 6.0 ltr (1.3 G) /hour At Cruising Speed
Cruising speed (approx) 5 knots
Max speed (approx) 7 knots
Engine revised and renovated in 2004.

Dimensions

LOA 11.90m (39'1")
LWL 0.00m (0'0")
Beam 4.00m (13'1")
Draft Min 0.00m (0'0")
Draft Max 0.00m (0'0")
Displacement 13,000kg (28,665.0lbs)
Headroom 2.00m (6'7")
Storage On marina

Rig

Cutter rigged Wood spars (1989), with stainless steel standing rigging (1989)

Sails

Mainsail - (1989)
Headsail - (1989)
Halyard winches 2
Other sails trinquete (unknown year)
escandalosa (unknown year)

Electrical Systems

12 volt, 2 batteries charged by: engine, shore power

construction

Wood construction with Other underwater profile, paint finish
Quilla corrida.
Recubierto de polyester
Teak mast
Oregon pine.

Accommodation

Manual water system tick    
Handbasin 1
Shower 1
Heads 1 heads
Double forecabin.
5 berths with 1 doubles and 3 singles in 2 cabin(s)

Nav Equipment

Compass tick Wind tick
Log tick Echo sounder tick
Navigation lights tick    

Deck Gear

Warps tick Fenders tick
Boathook tick    
manual windlass
1 anchors
(Arrastre)
20.00m (65'7") of chain
20.00m (65'7") of warp
dinghy (1989)
(Inflatable)
0hp outboard (unknown year)

Safety Equipment

Liferaft tick Life jackets tick
2 bilge pumps (1 manual / 1 electric)

Broker's Comments

Register with Boatshed to see 34 extra photos of this Gaffel Cutter .
This classic cutter, built by Jurgen Ilmen in 1989 was designed by Kurt Oehlman based on Colin Archer designs.
She requires refurbishment and renovating down below to utilise her spacious but spartan interior.
An ideal DIY project and has potential as a liveaboard.
Spanish flagged.
These boat details are subject to contract.
Note: Offers on the asking price may be considered.

This Gaffel Cutter has been personally photographed and viewed by Alejandro y Michelle of Boatshed Cadiz. Click here for contact details.
Disclaimer
The particulars detailed herein are intended to give a fair description of the vessel but their accuracy cannot be guaranteed, these particulars are not a part of any contract or offer and are supplied on the understanding that all negotiations shall be through Boatshed Brokerages, who are acting as brokers for the vendor. The vendor is not selling in the course of a business unless otherwise stated. The prospective purchaser is strongly recommended to check the particulars and where appropriate, at his own expense, to employ qualified agents to carry out surveys, structural and/or mechanical & electrical.
Feedback Form