Kingfisher 20 Plus

< Back to "Sail boats under 27 foot"

This boat has been sold but here are some boats that are still For Sale

Kingfisher 20 Plus

Kingfisher 20 Plus

Boat REF# 57466
Price This boat has been sold
LOA 6.58m (21'7")
Year 1976
Construction GRP
Underwater profile Bilge keels
Berths 4
Engine 1 x petrol 2 stroke 5hp, Tohatsu (2006)
Lying North Wales

I want to see full spec & up to 80 photos of this boat,register me now

Extra Details

Designer R.A.G. Nierop
Builder Westfield Engineering
Lying North Wales
Fuel capacity 0 x 0.0 ltr (0.0 G)
Water capacity 1 x 5.0 ltr (1.1 G)
Holding tank capacity 0 x 0.0 ltr (0.0 G)
Last survey Not Recorded

Mechanical

Engine 1 x petrol 2 stroke 5hp
Tohatsu (2006)
Engine Hours Not Recorded
Engine Cooled Raw Water
Steering Tiller
Drive outboard
Prop(s) 3 Blade
Fuel consumption (approx) Not Recorded
Cruising speed (approx) 5 knots
Max speed (approx) Not Recorded
Engine hours = 20
The trailer has been completely overhauled with new tyres, axle and suspension units, brakes and tow hitch with handbrake.

Dimensions

LOA 6.58m (21'7")
LWL 5.87m (19'3")
Beam 2.11m (6'11")
Draft Min 0.71m (2'4")
Draft Max 0.71m (2'4")
Displacement 1,315kg (2,899.6lbs)
Headroom 1.37m (4'6")
Storage On trailer

Rig

Sloop rigged Aluminium spars (unknown year), with stainless steel standing rigging (unknown year)

Sails

Mainsail Kemp - Slab (2007)
Headsail - Furling (2006)
Sheet winches 2
Other sails Cruising chute (2007)
Crusader sails bi radial roller reefing genoa 150% in contender sail cloth 6.4oz with blue sacraficial strip (2006). Down wind sail Kemp sails Supercruise/costal tri-radial designed all purpose cruising chute made in Bainbridge International MP-70, 1.0oz impregnated ripstop nylon (2007). Kemp sails mainsail in Fastnet 6.5 cloth performance cruise Bainbridge International's woven dacron, cross cut and loose footed design complete with reefs, reef spectacles and draft dtripes (2006).

Electrical Systems

12 volt, 1 batteries charged by: engine

construction

GRP construction with Bilge keels underwater profile, paint finish
The hull finish is gelcoat and paint. Twin keels, cast iron 250kg each, bolted through steel plates moulded into hull with 12mm S/S bolts per keel.
The windows were replace in 2008 with 8mm clear acrylic with s/s bolt fastenings.

Accommodation

Cooker tick Grill tick
Sink tick Manual water system tick
Non-Smokers tick    
Handbasin 1
Shower 0
Heads 1 heads
Main cabin with stowage under. Galley with sink and stowage under. Chart table, Shelves round cabin sides. Separate toilet and hanging locker compartments with teak sliding doors.
4 berths with 0 doubles and 4 singles in 2 cabin(s) 2 burner gas cooker

Nav Equipment

Compass tick Speed tick
Log tick Echo sounder tick
VHF DSC radio tick GPS tick
Chart plotter tick Autopilot tick
Navigation lights tick    

Deck Gear

Sail cover tick Warps tick
Fenders tick Boathook tick
Road trailer tick    
2 anchors
30.00m (98'5") of chain
20.00m (65'7") of warp

Safety Equipment

Life buoys tick Horn tick
Boarding ladder tick    
1 bilge pumps (1 manual / 0 electric)

Broker's Comments

Register with Boatshed to see 55 extra photos of this Kingfisher 20 Plus .
This popular small family cruising boat has been made even better with the extended cockpit. A lot of thought has gone into this boat to include all the essential design features required for a comfortable sail and stay. A lovely boat, with upgraded electrics, on an overhauled trailer makes her a real find! - come and see her and you will be impressed!
These boat details are subject to contract.
Note: Offers on the asking price may be considered.

This Kingfisher 20 Plus has been personally photographed and viewed by Rob of Boatshed North Wales. Click here for contact details.
Disclaimer
The particulars detailed herein are intended to give a fair description of the vessel but their accuracy cannot be guaranteed, these particulars are not a part of any contract or offer and are supplied on the understanding that all negotiations shall be through Boatshed Brokerages, who are acting as brokers for the vendor. The vendor is not selling in the course of a business unless otherwise stated. The prospective purchaser is strongly recommended to check the particulars and where appropriate, at his own expense, to employ qualified agents to carry out surveys, structural and/or mechanical & electrical.
Feedback Form