One Tonner

< Back to "Sail boats 35 to 50 foot"

This boat has been sold but here are some boats that are still For Sale

One Tonner

One Tonner

Boat REF# 14241
Price This boat has been sold
LOA 12.04m (39'6")
Year 1973
Construction Wood laminate
Underwater profile Fin
Berths 7
Engine 1 x diesel 20hp, Beta (1998)
Lying Torbay

I want to see full spec & up to 80 photos of this boat,register me now

Extra Details

Designer Miller & Whitworth
Builder Douglas Brooker Custom Yachts
Lying Torbay
Fuel capacity 1 x 80.0 ltr (17.6 G)
Water capacity 2 x 160.0 ltr (35.2 G)
Holding tank capacity 0 x 0.0 ltr (0.0 G)
Last survey 01/01/1988

Mechanical

Engine 1 x diesel 20hp
Beta (1998)
Engine Hours Not Recorded
Engine Cooled Fresh Water
Steering Tiller
Drive Shaft
Prop(s) 2-bladed, fixed
Fuel consumption (approx) 2.0 ltr (0.4 G) /hour At Cruising Speed
Cruising speed (approx) 6 knots
Max speed (approx) 7 knots
Engine spares tick    
Over £1,000 spent on engine in 2004 replacing or servicing alternator, starter motor, silencer and drive (engine drives in reverse); 3rd battery is a spare; electrics replaced 2001

Dimensions

LOA 12.04m (39'6")
LWL 10.21m (33'6")
Beam 3.53m (11'7")
Draft Min 1.91m (6'3")
Draft Max 1.91m (6'3")
Displacement 7,620kg (16,802.1lbs)
Headroom 1.88m (6'2")

Rig

Sloop rigged Aluminium spars (1973), with stainless steel standing rigging (2000)

Sails

Mainsail - Slab (1999)
Halyard winches 2
Sheet winches 2
Other sails Nos. 1 & 3 (1999)
No. 2 (1994)
Mainsail (1984)
Lightweight No. 1, No. 4, trysail, 2 staysails (1973)
3 spinnakers (all good) varying weights and sizes) (unknown year)
2 spinnakers (not good, but usable) (unknown year)
Spinnaker gear tick    
Winches for Spinnaker uphaul and downhaul
and kicker; twin groove head-foil; alloy spinnaker pole 2001

Electrical Systems

12 volt, 3 batteries charged by: engine, wind generator Forgen 0.2A

construction

Wood laminate construction with Fin underwater profile, paint finish
Triple ply, GRP sheathed

Accommodation

Cooker tick Grill tick
Sink tick Icebox tick
Manual water system tick    
Handbasin 1
Shower 0
Heads 1 heads
New sea-toilet 2005
7 berths with 0 doubles and 7 singles in 1 cabin(s) 2 burner gas cooker

Nav Equipment

Compass tick Speed tick
Wind tick Log tick
Echo sounder tick VHF tick
Autopilot tick Clock tick
Barometer tick Navigation lights tick
Swiftech VHF; NASA Clipper log, depth, wind and close-haul display; Raytheon ST4000+ autopilot (Oct 2000)

Deck Gear

Sail cover tick Warps tick
Fenders tick Boathook tick
2 anchors
(CQR, Danforth)
9.14m (30'0") of chain
18.29m (60'0") of warp

Safety Equipment

Fire fighting equipment tick Liferaft tick
Life jackets tick Life buoys tick
Safety harnesses tick Horn tick
Danbuoy tick Boarding ladder tick
4 bilge pumps (3 manual / 1 electric)
XM 6-man valise liferaft (service due March 2006); jackstays; MOB recovery system; 4 stanchions replaced 2001

Broker's Comments

This One Tonner has a great racing pedigree, having won the Sydney-Hobart in the 70’s and came to this part of the world as a member of the Hong Kong One Ton Cup team a few years later. The quality of build and sea-worthiness were born out when she was one of only two finishers in the last Brixham-Santander race in 2001.
She has featured in a number of books on ocean racing and this is an opportunity to buy a racing boat with an interesting history.

This boat has been viewed and photographed by Nick Morton of Boatshed Brixham. Register or log in to see 40 more photos of this boat. These boat details are subject to contract.

Note: Offers on the asking price may be considered.
Disclaimer
The particulars detailed herein are intended to give a fair description of the vessel but their accuracy cannot be guaranteed, these particulars are not a part of any contract or offer and are supplied on the understanding that all negotiations shall be through Boatshed Brokerages, who are acting as brokers for the vendor. The vendor is not selling in the course of a business unless otherwise stated. The prospective purchaser is strongly recommended to check the particulars and where appropriate, at his own expense, to employ qualified agents to carry out surveys, structural and/or mechanical & electrical.
Feedback Form