Rinker 246 Captiva Bowrider

This boat has been sold but here are some boats that are still For Sale

Rinker 246 Captiva Bowrider

Boat REF# 61041
Price removed from sale/
LOA 7.98m (26'2")
Year 2006
Construction GRP
Underwater profile Planing
Berths 0
Engine 1 x petrol 300hp, Mercruiser 350 MAG MPI Bravo 3 (2006)
Lying Lake Conroe

I want to see full spec & up to 80 photos of this boat,register me now

Extra Details

Designer Rinker
Builder Rinker
Lying Lake Conroe
Fuel capacity 1 x 340.9 ltr (75.0 G)
Water capacity 1 x 45.5 ltr (10.0 G)
Holding tank capacity 0 x 0.0 ltr (0.0 G)
Deadrise 16-20
Last survey Not Recorded

Mechanical

Engine 1 x petrol 300hp
Mercruiser 350 MAG MPI Bravo 3 (2006)
Engine Hours Not Recorded
Engine Cooled Raw Water
Steering Wheel
Drive outdrive
Prop(s) Dual
Fuel consumption (approx) Not Recorded
Cruising speed (approx) 35 knots
Max speed (approx) 43 knots
Very low hours on the engine (less than 40).
For the instrument panel, the middle of the 5 gauges is twice as large to make it easy to pick up and it has four functions. Rocker switches are fanned along the bottom in a semi-circle There is even a stereo remote panel off to the left.

Dimensions

LOA 7.98m (26'2")
LWL 0.00m (0'0")
Beam 2.59m (8'6")
Draft Min 0.56m (1'10")
Draft Max 0.91m (3'0")
Airdraft 1.52m (5'0")
Displacement 2,245kg (4,950.0lbs)
Headroom 0.00m (0'0")
Storage Dry storage

Electrical Systems

12 volt, 2 batteries charged by: engine Dual Battery Switch

construction

GRP construction with Planing underwater profile, gelcoat finish
Rinker designers spent almost 2 years creating a mold for this versatile runabout settling on a style that has more flares and seques than previously created. Rinker used encapsulated stringers with a lifetime warranty and vinyl ester resins throughout.

Accommodation

Pressurised water system tick Fresh water wash tick
Cockpit shower tick    
Handbasin 1
Shower 0
Heads 1 heads (Porta Potti)

Nav Equipment

Compass tick Speed tick
Echo sounder tick Stereo tick
Navigation lights tick    

Deck Gear

Road trailer tick Swim Platform tick
Swim Ladder tick Bimini tick
2 anchors
(Fluke)
3.05m (10'0") of chain
30.48m (100'0") of warp
Seats in the bow are deep for safety. The small hollow areas around the gunwale are convenient places to store lotion or personal items. The front of the bow is a boarding ladder and anchor locker. The cockpit is vast and tells you right away this is a Rinker family boat. There is a huge storage compartment in the floor and another deep compartment under the passenger seat behind the captains chair that runs all the way underneath the transom walkthrough. That's in addition to the generous head compartment under the portside console and a storage unit under the drivers console. The flip up bolster on the wide helm seat making it very functional to use. They also created a big solid armrest like you would expect in a boat used for water sports. All deck seats are like new with pipe stitching and pleats to class it up. The sunpad astern can be raised on the port side to form a lounger over the walk-through. It also a great place to prep for skiing or wakeboarding. The storage trunk on the transom is large enough to store a wakeboard. A refreshment center behind the captains seat is part of the deck and not a separate unit. A 10 gallon freshwater tank is plumbed to the sink.

Toys

Personal rafts and large tow raft

Safety Equipment

Life jackets tick Horn tick
Boarding ladder tick GasFuel Detector tick
1 bilge pumps (0 manual / 1 electric)

Broker's Comments

Register with Boatshed to see 51 extra photos of this Rinker 246 Captiva Bowrider .
The aft cockpit seating configuration has a large U-shaped lounge with portside transom walk through and insulated cooler under the back seat. The miniature wet bar to starboard and removeable snack table makes this a very comfortable entertainer. Sporty helm has the look of a European performance car with contoured tilt wheel. The array of gauges are arranged for easy reading along with accessory toggle switches. The Clarion AM/FM CD stereo remote is also within quick reach. On the companion side Rinker installed a spacious compartment for changing into swim wear or for a portable head (included). A convenient ski locker is situated between the 2 swival bucket seats at the helm that feature tri-tech suspension with flip up bolsters and thick padding. Astern there is a large sun lounge with a multi position pad that covers the transom walk through. The spacious swim platform offers a locker large enough for a wakeboard. Additionally there is a transom shower and plenty of cup holders. At the bow there is enough seating for 4 people to enjoy the snack table. Under the forward cushion is a deep anchor locker for the fluke style anchor and a boarding ladder at stem51head for easy beach access. This is truly a great boat for spending the day on the water with the family and friends.
These boat details are subject to contract.
Note: Offers on the asking price may be considered.

This Rinker 246 Captiva Bowrider has been personally photographed and viewed by Chris of Boatshed Texas. Click here for contact details.
Disclaimer
The particulars detailed herein are intended to give a fair description of the vessel but their accuracy cannot be guaranteed, these particulars are not a part of any contract or offer and are supplied on the understanding that all negotiations shall be through Boatshed Brokerages, who are acting as brokers for the vendor. The vendor is not selling in the course of a business unless otherwise stated. The prospective purchaser is strongly recommended to check the particulars and where appropriate, at his own expense, to employ qualified agents to carry out surveys, structural and/or mechanical & electrical.
Feedback Form