The boat featured is not currently for sale by Boatshed. The boat information and images presented are part of Boatshed’s back catalogue of the 25,000+ boats we have listed in the last 20 years and appear here for general information and guidance purposes about Boatshed and our boat selling systems and services

Rosborough RF246 HSV

£0 Sold / Unavailable
  • Boat REF#  ·  171347
  • LOA  ·  7.62m
  • Year  ·  2003
  • Construction  ·  GRP
  • Underwater profile  ·  semi-displacement
  • Berths  ·  4
  • Engine  ·  2 x petrol 90hp, Mercury (2006)
  • Lying  ·  Everett, WA USA - Shown by Appointment
Boatshed Seattle
Boatshed Seattle

The boat featured is not currently for sale by Boatshed. The boat information and images presented are part of Boatshed’s back catalogue of the 25,000+ boats we have listed in the last 20 years and appear here for general information and guidance purposes about Boatshed and our boat selling systems and services

Extra Details

Builder Rosborough
Lying Everett, WA USA - Shown by Appointment
Fuel capacity 545.5 ltr (120.0 G) Total - 1 Tanks
Water capacity 204.5 ltr (45.0 G) Total - 1 Tanks
Holding tank capacity 150.0 ltr (33.0 G) Total - 1 Tanks

Mechanical

Engine 2 x petrol 90hp
Engine make and model Mercury (2006)
Engine Hours engine1= 750
engine2= 1400
Engine Cooled Direct
Steering Wheel
Drive outboard
Prop(s) Composite
Fuel consumption (approx) 5.9 ltr (1.3 G) /hour At Cruising Speed
Cruising speed (approx) 15 knots
Max speed (approx) 19 knots
Engine spares

Spare Props.
Current props are composite and have replaceable blades.
Four 6V house batteries - one 12V AGM battery for windlass and backup start battery.
Head pump replaced in 2013.
New shift cables in 2012.
1000 Watt Heart Inverter
60 Amp ProNautic battery charger.
Bennett trim tabs.
Fuel gauge.
Windshield wipers.
The outside of the macerator thru-hull is tapped to take a NPT fitting to allow a garden hose for pumping at a RV facility when on trailer.
Equipped with a galvanic isolator.
Additional emergency bilge pumpt.
Full curtains for privacy.

Dimensions

LOA 7.62m
LWL 7.11m
Beam 2.59m
Draft Min 0.46m
Displacement 2,449kg (5,400.0lbs)
Headroom 1.98m
Storage Dry storage

Electrical Systems

12 volt battery, 5 batteries charged by: engine, shore power 35 amp engine alternators

Construction

Construction GRP
Underwater profile semi-displacement
Finish Gelcoat finish

One piece hand-layed solid construction fiberglass with integral gunwale flange and floor/furniture liner. Deck and floors are sandwich core constructed with molded non-skid surfaces.
Interior trim is finished with teak moldings, Windows are tempered safety glass in molded fiberglass frames with opening windows of aluminum frame.
Deck hardware and rails, etc. are all stainless steel.
Through hulls are bronze/s.s. ball valves below waterline. Power hull extension with 3 step ladder for twin power.

The hull design and center-line keel provides stability while the straight flat run aft ensures a good turn of speed.
The full bow sections and shallow forefoot allow for both soft entry and comfortable ride while heading into or running with the seas.
Owners have the highest praise for this boat in all weather conditions.

Accommodation

Total # of berths 4
No. of double berths 2
Cabin(s) 1
Handbasin 1
Shower 1
Heads 1 heads (Manual)

A bright interior design with large safety windows all around.
She sleeps four - two in the forward private berth and two on the convertible dinette salon table.
The center triangle filler for the forward berth can be removed and placed on a post to use as center table in the cockpit.
Galley is located to port and includes a two burner propane stove, refrigerator, large stainless steel galley sink, multiple storage drawers and large prep counter space.
Wallas diesel-fired forced air heat system.
Five gallon hot water tank and cockpit shower. Screened opening center window and two large sliding windows with screens. Two 13” screened roof hatches.
Helm seating to starboard with forward-facing first mate seating on the port side.

2 burner gas cooker/stove

Accommodation

Cooker/stove
Sink
Refrigerator
Carpet
Curtains
Cabin heating
Pressurised water system
Hot water system
Raw water wash
Cockpit shower

A bright interior design with large safety windows all around.
She sleeps four - two in the forward private berth and two on the convertible dinette salon table.
The center triangle filler for the forward berth can be removed and placed on a post to use as center table in the cockpit.
Galley is located to port and includes a two burner propane stove, refrigerator, large stainless steel galley sink, multiple storage drawers and large prep counter space.
Wallas diesel-fired forced air heat system.
Five gallon hot water tank and cockpit shower. Screened opening center window and two large sliding windows with screens. Two 13” screened roof hatches.
Helm seating to starboard with forward-facing first mate seating on the port side.

2 burner gas cooker/stove

Deck Gear

Warps
Fenders
Trailer
Swim Platform
Cockpit Enclosure

Electric Lewmar windlass
2 anchors
(Plow & Fortress)
7.62m of chain
45.72m of warp
Dive ladder and tank storage brackets in cockpit.

Nav Equipment

Compass
Radar
VHF
GPS
Autopilot
Stereo
Clock
Navigation lights

Icom IC-M433 VHF Radio with DSC.
Lowrance Radar Global Map 8300 HD chart plotter with all US and Canadian chart set.
Integrated Fuel flow meters display.
Ray-Marine Depth Sounder
Raymarine Auto Pilot
Bennett Hydraulic Trim Tabs
Lowrance GPS
3 Lobe Radar Reflector

Safety Equipment

LPG Detector
Life jackets
Horn
Boarding ladder

2 bilge pumps (0 manual / 2 Electric)

Extra electric emergency bilge pump.
Ladder on swim step for self rescue.
Armstrong ladder - for re-boarding with Scuba gear
Custom 2007 Load Master aluminum bunk-style trailer with electric-over-hydraulic disk brakes.

Broker's Comments

The Rosborough RF-246 HSV (High Side Vessel) is a well-respected and extremely well-constructed boat designed to take on the rough Atlantic seas. A great boat for a couple, with room for an additional couple. This vessel makes a excellent platform for diving, cruising and gunk-holing. With economical and easy-to-maintain Mercury 90 HP outboard motors. Cruise at 15 knots at about 1.3 MPG fuel burn.

A custom trailer designed for extended hauling (8'6" beam) and equipped with electric-over-hydraulic brakes for safe hauling. (Trailer is included)

This is a terrific and trailerable pocket trawler in excellent condition, ready to use today and priced to sell.

These boat details are subject to contract.
Note: Offers on the asking price may be considered.

This Rosborough RF246 HSV has been personally photographed and viewed by Randy Hacker of Boatshed Seattle. Click here for contact details.
Where the particulars herein give details of a boat, whether new or used, they are intended to give a fair description of the vessel but are not guaranteed as accurate or complete. They shall not form part of any offer or contract for the sale of the vessel. The prospective purchaser is recommended to independently check the particulars and the vessel. The vendor is not selling in the course of a business unless otherwise stated. Personal property is excluded from the sale of the vessel unless specifically included in the listing specification above or in a purchase contract. Personal property may be equipment or gear not permanently attached to the vessel including but not limited to: artwork, entertainment equipment, fishing equipment, TV receivers, recreational equipment, kayaks, tools, and personal appliances. Photos that may incidentally depict owners' personal property do not convey that such items are included in the sale of the vessel unless such items are specifically listed herein. At all times, where the particulars herein give details of a new boat and/or a new boat to be supplied/built by a builder/manufacturer, or a boat to be chartered, via our introduction, we do not guarantee or assume responsibility for the accuracy or reliability of any information offered by third-party companies in respect thereof including without limitation new boat builders/manufacturers, charter companies and/or companies/businesses which are ‘Friends of Boatshed’. We shall not be responsible for, or party to, any transactions, contracts or agreements between you and such third-party providers of products or services and it is incumbent upon you to verify such details direct with such entities and contract with them at your sole discretion and on terms that you agree.

Comments 0

Please note this comments section is public. Please do not post your personal details here. Please read our commenting guidelines before posting.

Be the first to leave a comment or ask a question...
You must be logged in to leave a comment.
Login or register for free