Sea trader 38

< Back to "Sail boats 35 to 50 foot"

This boat has been sold but here are some boats that are still For Sale

Sea trader 38

Sea trader 38

Boat REF# 14161
Price This boat has been sold
LOA 11.74m (38'6")
Year 1986
Construction Steel
Underwater profile Other
Berths 5
Engine 1 x diesel 35hp, VW Petter (1980)
Lying Central Algarve

I want to see full spec & up to 80 photos of this boat,register me now

Extra Details

Designer E.R.Barnes South Africa
Builder
Lying Central Algarve
Fuel capacity 1 x 90.0 ltr (19.8 G)
Water capacity 2 x 350.0 ltr (77.0 G)
Holding tank capacity 0 x 0.0 ltr (0.0 G)
Last survey 01/01/2001

Mechanical

Engine 1 x diesel 35hp
VW Petter (1980)
Engine Hours Not Recorded
Engine Cooled Raw Water
Steering Tiller
Drive Shaft
Prop(s) 3 blade
Fuel consumption (approx) 2.0 ltr (0.4 G) /hour At Cruising Speed
Cruising speed (approx) 5 knots
Max speed (approx) 6.5 knots
New stern gear, inlets and outlets, exhausts, fuel tank, all main pipework, j-clips, fuel and water bowls,engine mountings all new in 2003.

Dimensions

LOA 11.74m (38'6")
LWL 11.00m (36'1")
Beam 3.60m (11'10")
Draft Min 1.70m (5'7")
Draft Max 1.70m (5'7")
Displacement 0kg (0.0lbs)
Headroom 1.95m (6'5")

Rig

Sloop rigged Paul Green Aluminium spars (1986), with galvanised standing rigging (2003)

Sails

Mainsail Hoods - Slab (1997)
Headsail - Furling (1997)
Halyard winches 3
Sheet winches 2
Spinnaker gear tick    
Mast alluminium with single spreaders, SS12mm forstay, shrouds and double back stays all 12mm galv rigging (2003). Stanchions and siderails all 25mm galve pipe. Barlow Winches. Profurl roller reefing.

Electrical Systems

12 volt, 2 batteries charged by: engine, solar panels

construction

Steel construction with Other underwater profile, paint finish
All steel multichine cutter with aft cockpit. 6 chines either side with 18mm longitudinal roundbar on each chine. Frames, 50mm/6mm flat bar, spaced 450mm apart 25 frames in all. Keel 3/4 length, sole thickness 20mm, sides 5mm. Ballast approx. 3 tons pig iron encapsulated. Bottom 3 underwater chines, 5mm corten steel, top 3 chines and decks, 3mm mild steel.

Accommodation

Cooker tick Sink tick
Icebox tick Curtains tick
Manual water system tick    
Handbasin 1
Shower 0
Heads 1 heads
One large double and three piolet berths. She is an ideal livaboard long distance cruiser for 2-4 people and comes with a large amount of cruising kit and spares
5 berths with 1 doubles and 3 singles in 3 cabin(s) 3 burner gas cooker

Nav Equipment

Compass tick Echo sounder tick
VHF tick GPS tick
Clock tick Barometer tick
Navigation lights tick    

Deck Gear

Sail cover tick Spray dodgers tick
Sun awning tick Warps tick
Fenders tick    
electric Cougar windlass
2 anchors
(Plough-Danforth)
50.00m (164'1") of chain
100.00m (328'1") of warp
Aries windvane self-steering system
Tinker Traveller dinghy (1993)
8ft ply sailing dingy

Safety Equipment

Fire fighting equipment tick Liferaft tick
Life buoys tick Horn tick
Danbuoy tick Boarding ladder tick
2 bilge pumps (1 manual / 1 electric)

Broker's Comments

This boat has been viewed and photographed by Gary of Boatshed Algarve. Register or log in to see 43 more photos of this boat. These boat details are subject to contract.
This 1986 built to last Sea Trader 38 Cutter live aboard is a solid sea servant which will take you off on adventures all around the globe.
Designed by E.R.Barnes in South Africa, date of the last survey was 2001
She has good accommodations with a total of five berths one double and three single.
The knowledgeable owner has told about its wonderful sea adventures all around the world.
The engine is a sturdy 35-40 hp VW Petter 1500 cc which will return a healthy 2-3 litres per hour.
The main and head sail are eight years old with the mast being aluminium, both sails are manufactured by Hoods with standing rigging being re-placed in 2003 which does need to be re-oiled.
There are some engine spares together with a new reel of standing rigging.

Note: No offers on the asking price will be considered. This vessel has been reduced to sell.

Disclaimer
The particulars detailed herein are intended to give a fair description of the vessel but their accuracy cannot be guaranteed, these particulars are not a part of any contract or offer and are supplied on the understanding that all negotiations shall be through Boatshed Brokerages, who are acting as brokers for the vendor. The vendor is not selling in the course of a business unless otherwise stated. The prospective purchaser is strongly recommended to check the particulars and where appropriate, at his own expense, to employ qualified agents to carry out surveys, structural and/or mechanical & electrical.
Feedback Form