Wooden Bristol Channel Cutter

< Back to "Sail boats 27 to 34 foot"
Wooden Bristol Channel Cutter
contact me about this boat
watch this boat in My Boatshed
send this page to a friend

Wooden Bristol Channel Cutter

Boat REF# 116376
Price €60,000.00
Approx £48,231.51

Reduced
LOA 9.00m (29'6")
Year 1989
Construction Wood laminate
Underwater profile Long keel
Berths 5
Engine 1 x diesel 20hp, Vetus (Mitsubishi) (1989)
Lying Prov. Barcelona
Make an offer

Contact the Broker

Boatshed Broker Gert Van den Bergh
Telephone +34 93 894 11 99
Mobile +34 618 363 503
Email gert@boatshedbarcelona.com

I want to see full spec & up to 80 photos of this boat,register me now

Extra Details

Designer Lyle Hess
Builder Ast. Caravela
Lying Prov. Barcelona
Fuel capacity 2 x 100.0 ltr (22.0 G)
Water capacity 1 x 180.0 ltr (39.6 G)
Holding tank capacity 1 x 75.0 ltr (16.5 G)
Last survey 23/03/2009

Mechanical

Engine 1 x diesel 20hp
Vetus (Mitsubishi) (1989)
Engine Hours engine1:   < 300
Engine Cooled Raw Water
Steering Tiller
Drive Shaft
Prop(s) 2-bladed fixed
Fuel consumption (approx) 1.5 ltr (0.3 G) /hour At Cruising Speed
Cruising speed (approx) 6.2 knots
Max speed (approx) 7.4 knots
2 cargadores independientes (1 para cada batería).


2 independent battery chargers (1 for each battery).

Dimensions

LOA 9.00m (29'6")
LWL 8.38m (27'6")
Beam 3.27m (10'9")
Draft Min 1.50m (4'11")
Draft Max 1.50m (4'11")
Displacement 7,500kg (16,537.5lbs)
Headroom 1.90m (6'3")
Storage In water

Rig

Cutter rigged Caravela Wood spars (1989), with stainless steel standing rigging (1995)

Sails

Mainsail Lee Sails - Slab (2000)
Headsail - Hank on (2000)
Halyard winches 2
Sheet winches 2
Other sails Yankee (unknown year)
Trinqueta/staysail (unknown year)
Palo, botavara, botalón etc. en "Spruce" encolado con epoxy.


Mast, boom, bowsprit etc, in "Spruce", glued with epoxy.

Electrical Systems

12 volt, 2 batteries charged by: engine, shore power

construction

Wood laminate construction with Long keel underwater profile, paint finish
Casco, cubierta y acastillaje hechos en Astilleros Caravela. Quilla en "Bolondo" macizo. Cuadernas, baos y laminados en "Niangon". Casco laminado WEST SYSTEM: 3 capas de listones de "Sapeli" entrecruzadas encoladas con resinas epoxy. Grosor del casco: 30 mm. Cubierta de contrachapado de 12 mm con tejido de fibra laminado con epoxy encima mas 15 mm de "Teka" maciza alistonada. El interior y la finición han sido hecho por el propietario quien es carpintero marina de profesión.


Hull, deck and rig have been made by Astilleros Caravela (reputed wooden boat builder in Spain). Keel in solid"Bolondo". Frames, beams and laminates in "Niangon." Laminate hull WEST SYSTEM: 3 layers of crossed"Sapeli" planks glued with epoxy resins. Hull thickness: 30 mm. Deck in 12 mm plywood with laminated fiber fabric and epoxy on top covered with 15 mm of solid "Teak" strips. Interior and finishings have been done by the owner who is a professional shipwright.

Accommodation

Cooker tick Oven tick
Sink tick Pressurised water system tick
Handbasin 0
Shower 0
Heads 1 heads (Sea Toilet)
5 berths with 1 doubles and 3 singles in 1 cabin(s) 2 burner gas cooker

Nav Equipment

Navigation lights tick    

Deck Gear

Sail cover tick Warps tick
Fenders tick Boathook tick
manual Ursus windlass
1 anchors
(CQR)
70.00m (229'8") of chain
Molinete manual se incluye, pero no está montado.


Manual windlass is included, but is not installed on board.

Safety Equipment

Gas detector tick Life jackets tick
3 bilge pumps (1 manual / 2 electric)
Bomba de achique adicional con embrague (50.000 l/hora)


Additional bilge pump with differential (50.000 l/hour)

Broker's Comments

Register with Boatshed to see 39 extra photos of this Wooden Bristol Channel Cutter .
Este Bristol Channel Cutter ha sido construido según los planes de Lyle Hess en Astilleros Caravela. El diseño se hizo famoso, gracias a la pareja Pardey (www.landlpardey.com), quien lleva años navegando intensivamente en uno de estos barcos. El casco se construyó en el 1989, pero desde entonces el propietario (carpintero marino de profesión) lleva trabajando para terminar el interior del barco. Como consecuencia, se nota que el nivel de acabado es muy alto. El barco solo se abanderó en el 2009. La cocina es nueva, asimismo que los tapizados interiores. Un barco muy especial, muy fuerte y buen navegante para un aficionado de los barcos de madera. Bandera española, lista 7ª. Nota: se pueden considerar contra-ofertas.


This Bristol Channel Cutter was built according to the designs by Lyle Hess in the Caravela shipyard. The design has become famous thanks to the Pardeys (www.landlpardey.com) who have been sailing across the globe in one of these. The hull was built in 1989, but since then her owner (a professional shipwright) has been working off an on to finish the interior of the boat, according to his own very high standards, and it shows. The boat was only commissioned in 2009. The galley is new, and so is the upholstery. This is a very special, strong sail boat with good sea keeping for someone who is passionate about wooden boats. Spanish flag. Note: Offers on the asking price may be considered.
This Wooden Bristol Channel Cutter has been personally photographed and viewed by Gert Van den Bergh of Boatshed Barcelona. Click here for contact details.
Disclaimer
The particulars detailed herein are intended to give a fair description of the vessel but their accuracy cannot be guaranteed, these particulars are not a part of any contract or offer and are supplied on the understanding that all negotiations shall be through Boatshed Brokerages, who are acting as brokers for the vendor. The vendor is not selling in the course of a business unless otherwise stated. The prospective purchaser is strongly recommended to check the particulars and where appropriate, at his own expense, to employ qualified agents to carry out surveys, structural and/or mechanical & electrical.
Feedback Form