Wooden Steel Cutter

< Back to "Sail boats 35 to 50 foot"

This boat has been sold but here are some boats that are still For Sale

Wooden Steel Cutter

Wooden Steel Cutter

Boat REF# 76334
Price removed from sale/
LOA 11.00m (36'1")
Year 1983
Construction Steel
Underwater profile Fin
Berths 5
Engine 1 x diesel 30hp, Yanmar 3GM30F (2000)
Lying Cornwall

I want to see full spec & up to 80 photos of this boat,register me now

Extra Details

Designer Unknown
Builder Unknown
Lying Cornwall
Fuel capacity 1 x 125.0 ltr (27.5 G)
Water capacity 3 x 80.0 ltr (17.6 G)
Holding tank capacity 0 x 0.0 ltr (0.0 G)
Deadrise unknown
Last survey Not Recorded

Mechanical

Engine 1 x diesel 30hp
Yanmar 3GM30F (2000)
Engine Hours Not Recorded
Engine Cooled Fresh Water
Steering Tiller
Drive Shaft
Prop(s) Feathering Max-Prop
Fuel consumption (approx) Not Recorded
Cruising speed (approx) 5 knots
Max speed (approx) 6 knots

Dimensions

LOA 11.00m (36'1")
LWL 10.00m (32'10")
Beam 3.50m (11'6")
Draft Min 1.70m (5'7")
Draft Max 1.70m (5'7")
Displacement 7,000kg (15,435.0lbs)
Headroom 1.80m (5'11")
Storage Ashore

Rig

Cutter rigged Proctor Aluminium spars (1983), with stainless steel standing rigging (2007)

Sails

Mainsail - Slab (unknown year)
Headsail - Furling (unknown year)
Halyard winches 2
Sheet winches 2
New Facnor continuous line Furling gear
Self tacking staysail

Electrical Systems

12 volt, 3 batteries charged by: engine, wind generator Wind gen/water gen

construction

Steel construction with Fin underwater profile, paint finish
Stainless steel fuel tank.
Water tanks 240ltrs in total, 2 x 80 ltr Flexi water tanks and 1 x 80ltr midships tank.

Accommodation

Cooker tick Grill tick
Oven tick Sink tick
Cabin heating tick Manual water system tick
Hot water system tick    
Handbasin 1
Shower 1
Heads 1 heads (Manual)
Taylors diesel stove provides a cosy feel to the large saloon area combined with the insulation foam on the hull she has been sailed up to Greenland and back in comfort
5 berths with 1 doubles and 3 singles in 2 cabin(s) 2 burner gas cooker

Nav Equipment

Compass tick Speed tick
Log tick Echo sounder tick
Radar tick VHF DSC radio tick
GPS tick Autopilot tick
Navtex tick Weather fax tick
Clock tick Barometer tick
Navigation lights tick    
Has mounting bracket for display monitor at Nav station.
Radar requires setup.

Deck Gear

Sail cover tick Warps tick
Fenders tick Swim Ladder tick
Instrument Covers tick    
manual windlass
2 anchors
(1 x CQR 1 x kedge )
50.00m (164'1") of chain
Unknown windvane self-steering system
Sail cover 2009

Safety Equipment

Gas detector tick    
3 bilge pumps (2 manual / 1 electric)
Gas lines new 2007
Henderson pump in loo as bilge pump

Broker's Comments

Register with Boatshed to see 54 extra photos of this Wooden Steel Cutter .
This is an interesting go anywhere sailing vessel, set up for liveaboard cruising.
20% of her topside steel plating together with her bow section has been replaced in 2009 due to damage incurred after dragging her mooring during a storm. No water entered the hull during this time and she has benefited from a flurry of upgrades and renewal as a result.

She has an extensive inventory with a number of equipment upgrades in recent years.
Her past experiences have included a circumnavigation and an expedition to Greenland.

She should not require much attention before being taken off on another adventure.

These boat details are subject to contract.
Note: Offers on the asking price may be considered.

This Wooden Steel Cutter has been personally photographed and viewed by Tony Cleal of Boatshed Plymouth. Click here for contact details.
Disclaimer
The particulars detailed herein are intended to give a fair description of the vessel but their accuracy cannot be guaranteed, these particulars are not a part of any contract or offer and are supplied on the understanding that all negotiations shall be through Boatshed Brokerages, who are acting as brokers for the vendor. The vendor is not selling in the course of a business unless otherwise stated. The prospective purchaser is strongly recommended to check the particulars and where appropriate, at his own expense, to employ qualified agents to carry out surveys, structural and/or mechanical & electrical.
Feedback Form