Macwester Wight

< Back to "Sail boats 27 to 34 foot"

This boat has been sold but here are some boats that are still For Sale

Macwester Wight

Macwester Wight

Boat REF# 63720
Price removed from sale/
LOA 9.75m (32'0")
Year 1973
Construction GRP
Underwater profile Bilge keels
Berths 7
Engine 1 x diesel 0hp, BMC Captain (unknown year)
Lying Exe River

I want to see full spec & up to 80 photos of this boat,register me now

Extra Details

Designer CSJ Roy
Builder
Lying Exe River
Fuel capacity 2 x 90.0 ltr (19.8 G)
Water capacity 2 x 90.0 ltr (19.8 G)
Holding tank capacity 0 x 0.0 ltr (0.0 G)
Last survey 01/04/2001

Mechanical

Engine 1 x diesel 0hp
BMC Captain (unknown year)
Engine Hours Not Recorded
Engine Cooled Raw Water
Steering Wheel
Drive Shaft
Prop(s) 3 Blade Bronze
Fuel consumption (approx) Not Recorded
Cruising speed (approx) 6 knots
Max speed (approx) 7 knots
Whilst I was onboard this boat the engine started almost immediately after 18 months of inactivity. Amazing!

Dimensions

LOA 9.75m (32'0")
LWL 8.53m (28'0")
Beam 2.89m (9'6")
Draft Min 0.00m (0'0")
Draft Max 0.99m (3'3")
Airdraft 10.05m (33'0")
Displacement 4,137kg (9,122.1lbs)
Headroom 1.90m (6'3")
Storage Ashore

Rig

Ketch rigged Aluminium spars (unknown year), with stainless steel standing rigging (unknown year)

Sails

Mainsail - Slab (unknown year)
Headsail - Hank on (unknown year)
Halyard winches 1
Sheet winches 2
Other sails Mizzen (unknown year)
Genoa 1 (unknown year)
Storm Jib (unknown year)
Genoa 2 (unknown year)
Genoa 3 (unknown year)

Electrical Systems

12 volt, 1 batteries charged by: engine, shore power

construction

GRP construction with Bilge keels underwater profile, paint finish
The hull had new gelcoat applied in 2003 and subsequently coated with two layers of epoxy paint.

Accommodation

Cooker tick Grill tick
Oven tick Sink tick
Icebox tick Manual water system tick
Fresh water wash tick    
Handbasin 1
Shower 0
Heads 1 heads (Porta Potti)
Accommodation is arranged with a V berth in the forepeak, a double in the aft cabin, a single portside quarter berth and the saloon table converts to a double. The forepeak needs new linings and headlinings and generally the interior needs a good scrub.
7 berths with 3 doubles and 1 singles in 3 cabin(s) 2 burner gas cooker

Nav Equipment

VHF tick GPS tick
Clock tick Barometer tick
Navigation lights tick    
Garmin 152 GPS
Navigation instrumentation needs augmenting and updating.

Deck Gear

Sail cover tick Spray dodgers tick
Warps tick Fenders tick
Boathook tick    
manual windlass
2 anchors
(Danforth)
10.00m (32'10") of chain
20.00m (65'7") of warp
Stainless steel supports for a cockpit canopy.

Safety Equipment

Life jackets tick    
2 bilge pumps (2 manual / 0 electric)

Broker's Comments

Register with Boatshed to see 41 extra photos of this Macwester Wight .
Macwester Wights are renowned for their solid construction. This centre cockpit ketch rigged version is no exception. Only for sale due to the owner's ill health, the boat has not been touched for five years, but prior to that considerable time and effort had been spent on her. The chainplates have been reinforced, new perspex windows installed, grab rails and drains removed and resealed etc. She now needs some extra electronics, lots of tlc and a good clean and polish to bring her back to life. These boat details are subject to contract.
Note: Offers on the asking price will be considered by a very motivated vendor.

This Macwester Wight has been personally photographed and viewed by Stephen Grimshaw of Boatshed Torquay. Click here for contact details.
Disclaimer
The particulars detailed herein are intended to give a fair description of the vessel but their accuracy cannot be guaranteed, these particulars are not a part of any contract or offer and are supplied on the understanding that all negotiations shall be through Boatshed Brokerages, who are acting as brokers for the vendor. The vendor is not selling in the course of a business unless otherwise stated. The prospective purchaser is strongly recommended to check the particulars and where appropriate, at his own expense, to employ qualified agents to carry out surveys, structural and/or mechanical & electrical.
Feedback Form